To avoid contamination of bacteria using ultra-clean workbench for inoculation operations - Database & Sql Blog Articles

7050 OSC seed vibration
MOS power IC full range
Spot Remarks 2017+
ESD TVS electrostatic protection tube, 0201 package, 3.3V ultra low capacitance ESD
Factory direct sales - SMD aluminum electrolytic capacitor, straight plug solid capacitors, imported from Japan, made with high-quality aluminum foil

1. Before each use of the ultra-clean workbench, the operator should first turn on the UV lamp and let it run for 20 minutes to ensure proper sterilization.

2. After the UV irradiation is complete, turn on the working power of the workbench, switch off the UV lamp, and spray the surface with 75% alcohol or 0.5% peracetic acid to disinfect it before starting the experiment.

3. During the entire experiment, all operations should be performed following strict aseptic procedures, especially when handling sensitive equipment like the illuminometer.

4. At the end of the experiment, clean the work surface thoroughly with a suitable disinfectant, turn off the main power supply, and then turn on the UV light again for 15 minutes to maintain a sterile environment for future use.

It is crucial to follow these steps consistently to ensure a contamination-free working environment and the accuracy of experimental results. Always double-check that all safety protocols are followed before and after using the ultra-clean workbench.

Dual Axis Solar Tracker System

Dual Axis Solar Tracker System,Sun Power Single Axis Solar Tracker,Dual Axis Solar Sun Tracker pv tracker,Pv Solar Tracking System

Hebei Jinbiao Construction Materials Tech Corp., Ltd. , https://www.pvcarportsystem.com

Posted on