To avoid contamination of bacteria using ultra-clean workbench for inoculation operations - Database & Sql Blog Articles

7050 OSC seed vibration

MOS power IC full range

Spot Remarks 2017+

ESD TVS electrostatic protection tube, 0201 package, 3.3V ultra low capacitance ESD

Factory direct sales - SMD aluminum electrolytic capacitor - straight plug solid capacitors, imported from Japan, made with high-quality aluminum foil

1. Before each use of the ultra-clean workbench, the operator should first turn on the UV lamp and allow it to irradiate for 20 minutes before starting the experiment.

2. After the UV light is turned off, activate the workbench power supply and disinfect the working surface using 75% alcohol or 0.5% peracetic acid.

3. Throughout the experiment, all operations must be conducted following strict aseptic procedures, including handling the illuminometer carefully and avoiding contamination.

4. At the end of the experiment, clean the workbench surface with disinfectant, turn off the power, and reactivate the UV lamp for an additional 15 minutes to ensure proper sterilization.

It's important to maintain a consistent routine to ensure a sterile environment and prevent cross-contamination. Always double-check that all equipment is properly powered down and that the UV light has been used as required. Regular maintenance and cleaning of the workbench are also essential to keep it functioning efficiently and safely for future experiments.