Tender Notice for Street Lighting Project of Dexing South Road, Panyu District

Title: Tender Notice for Street Lighting Project of Dexing South Road, Panyu District Tender No.: Announcement Date: March 3, 2009 Deadline: March 9, 2009 Tendering Agency: Guangzhou Panyu District Capital Construction Investment Management Office Province: Guangdong Province-Guangzhou City Contents: Important Note: This project is a pilot project for the bidding process reform of the financial investment construction project in Panyu District. The bidding procedures and practices have changed from the past. Bidders are requested to read the tender notice and bidding documents in detail, in strict accordance with the bidding. The announcement and bidding documents require bidding and submit relevant bidding materials, and please pay close attention to the notice or announcement of the website of the Guangzhou Construction Engineering Trading Center and the Panyu District Construction Bureau website.

According to the approval of Fanji [2003] No. 353, the Panyu District Capital Construction Investment Management Office of Guangzhou Municipality is now openly bidding for the street lighting project of Dexing South Road in Panyu District. The contractor is selected and the specific matters are announced as follows:

I. Project Name: Street Lighting Project of Dexing South Road, Panyu District

2. Bidding unit: Capital Construction Investment Management Office of Panyu District, Guangzhou City

Tendering agency: Guangzhou Jianhai Engineering Consulting Co., Ltd.

Third, the construction site: Dexing South Road, Panyu District, Guangzhou City.

4. Content, scale and bidding of the bidding: Content: According to the drawings and relevant technical materials provided by the bidding unit, complete the construction drawings, bidding documents, etc. of the cable laying, installation of the pole-based storage pole, installation of lighting equipment, etc. All the contents of the relevant materials issued during the bidding process. Scale: The road of Dexing South Road is about 1000 meters long. The street lamps are arranged in a staggered manner on both sides. The light pole stands on the right side of the sidewalk. It is mainly a 12-meter-high single-arm light pole. The lamps use 400w high-voltage nano lamps, and the pole spacing is 30. Meter. Segmentation: This project is divided into only one section.

5. The maximum bid for this project is RMB 1.72 million.

6. Source of funds: financial investment

7. Registration and registration fee:

Bidder applicants should log on to the website of Guangzhou Construction Engineering Trading Center from 0:00 on March 3, 2009 to 16:00 on March 9, 2009 to apply for bidding and pay the registration fee. The bidding fee is 100 yuan.

Eight, registration and payment of registration fees:

1. The bidder shall follow the “Guidelines for the registration of the external network bidding for the pilot project of Panyu District” and the “User Manual for the registration fee collection module for the external network” in the attachment of the bidding announcement on the website of the Guangzhou Construction Engineering Trading Center (). Log in with your own username and password, and complete online bidding and online payment. After the bidder completes the online registration, he/she must separately print the online bidding registration and the bidding online payment receipt, and the registration is successful.

2. The bidder holds the online bidding registration and bidding for the online payment receipt. At the time of bid registration, he will receive an invoice for the registration fee from the Panyu Trading Department of the Guangzhou Construction Engineering Trading Center.

9. The bidder shall meet the following conditions:

1. Having the status of an independent legal person, holding a valid legal person business license issued by the administrative department for industry and commerce, and operating according to national laws;

2. The bidder has three levels of professional contracting for the city and road lighting engineering required for the project (excluding the temporary three-level) or qualification;

3. The bidders hold the enterprise qualification certificate and safety production license issued by the construction administrative department;

4. The bidder intends to be the person in charge of the project. The temporary construction certificate of the registered construction engineer or construction engineer of the municipal public works or mechanical and electrical engineering level is 2 or above. The registered practice unit is the bidder and holds the project manager safety. Training assessment certificate (Class B). The project leader has been filed in the trading center as a builder. (Note: Before the project is opened, the project leader cannot handle the replacement or unlocking. When registering online, the bidder should ensure that the selected project leader meets the above conditions and that the project owner is consistent with the project at the time of bidding);

5. The bidder has completed the enterprise registration formalities in the Guangzhou Construction Committee. The content of the Guangzhou Construction Committee's website “Guangzhou Construction Industry Enterprise and Institutional Qualification Recording Data” shall prevail in the qualification review;

6. Not in a state of being ordered to suspend business;

7. There is no penalty period for the cancellation of the bidding qualification by the construction administrative department;

8. There is no state in which property is taken over, frozen, or bankrupt;

9. The bidder and its affiliated institutions did not participate in the preliminary work of the project, the preparation of the bidding documents, and the supervision work;

10. There is no affiliation or other interest with the unit that undertakes the supervision business of the bidding project;

11. This project does not accept consortium bidding.

X. Other explanations about the bidding procedures for this project:

1. Applicants should follow the “Guidelines for the registration of external network bids for the Panyu District Pilot Project” and the “User Manual for the Registration of Foreign Exchange Registration Fees” (also available through the website of Guangzhou Construction Engineering Trading Center). "Special area to download", through the Guangzhou Construction Engineering Trading Center website for bidding and online payment, and print online bidding and bidding online payment receipt, the receipt can only be registered within the registration period online cherry bidding and bidding The online payment receipt shall be the certificate for the bidder to submit the bid, and the bidder shall keep it safely and verify it when submitting the bidding documents. If you do not register online on time, or fail to pay the registration fee on time, or fail to print the receipt as required, you will lose your bid.

2. This project does not focus on organizing on-site reconnaissance. The tenderee shall set up corresponding signs and instructions at the project site. The bidder shall organize the survey on the project site and its surrounding environment according to the on-site address indicated in the bidding documents and the instructions and the signs set by the tenderee at the project site.

3. This project does not organize a Q&A session. After reviewing the bidding documents and the site of the survey, the bid applicant may submit a request for clarification. All questions shall be submitted in the project area of ​​the Guangzhou Construction Engineering Trading Center website within the specified time as specified in the bidding documents. signature. The tenderer (tendering agency) will clarify and answer the questions of the bidding applicants, and clarify and answer this question on the website of Guangzhou Construction Engineering Trading Center (http://) The zone is released. The bidder shall pay attention to the clarification, modification or supplement of the bidding documents issued by the tenderer (tendering agency).

4. Bid bond. The bidder shall submit the bid bond to the Guangzhou Construction Engineering Trading Center account by cash check, bank draft, annual bid bond, etc. (not in cash) when performing bid registration before bid opening. If the bid bond is submitted by bank transfer, the bid bond shall be guaranteed to arrive before 17:00 on the first working day before the bid opening. When the relevant documents are submitted to the Guangzhou Construction Engineering Trading Center for confirmation by the Panyu Trading Department, the tender deposit will be issued. Proof; payment of bid bond by means of cash check, bank draft, etc., shall be submitted at the time of bid registration, and the bidding certificate shall be issued by the Panyu Trading Department of Guangzhou Construction Engineering Trading Center; if the bid bond is paid in the form of annual bid bond, the bid shall be submitted. The annual margin payment certificate card at the time of registration is verified by the Panyu Trading Department of the Guangzhou Construction Engineering Trading Center. If the amount of the bid bond paid in the form of the annual bid bond is lower than the amount of the bid bond required by the project, the amount of the annual bid bond shall prevail, and there is no need to supplement the difference. In the bid registration, if it is found that the bidding applicant who fails to pay the bid bond in the name of the bidding enterprise or fails to submit the bid bond in full or on time, or submits the invalid or short bill, the bidding documents will be rejected. If the above situation is found after the successful bidder is determined and the bidder is the winning bidder, the bidding qualification will be cancelled.

5. Work procedures and matters on the day of bid registration, bid opening, bid evaluation, and qualification review:

(1) Bidding registration. The legal representative or legal representative authorized to participate in the bidding unit shall arrive at the first floor of the Panyu Trading Department to submit the qualification examination documents and bid documents at the time and place specified in the bidding documents, and collect the registration number and pay it in the order of the registration number. After bidding documents cost 200 yuan, drawing production fee 300 yuan and bid security of 100,000 yuan, the bid registration will be performed. When fulfilling the bid registration, the “Guangzhou Construction Project Bidding Application Form” (to be stamped with the official seal of the unit and the legal person signature), the “Self Appraisal Form for Bidding Applicants” and the legal representative certificate shall be presented. Power of Attorney for Legal Representative (limited to the time when the non-statutory representative is present), ID card of the client, online bidding and online registration of the bidding, and payment of the bidding documents (drawings) production fee receipt, payment of the bid bond voucher, etc. The original information is for verification. If the original documents such as relevant certificates, certificates, etc. cannot be submitted or if the bid bond, bidding documents and drawings are not paid as required, the tenderee will refuse to accept the bid registration. The “Self Appraisal Form for Bidding Applicants” is the qualification examination conducted by the bid applicant according to the qualification examination conditions set by the bidding. If the bidder fails to pass the self-inspection, the bidding will not be registered; the content of the self-review form is verified to be false. The bid bond will be forfeited and reported to the administrative department for serious treatment.

(2) Original verification of qualification examination documents: After the deadline for bid registration, the bidder shall provide the original documents required for verification in the “Qualification Examination Documents List” of the qualification examination documents on the spot in the order of the registration number. The tenderer or the bidding agent shall also check whether the bidder has filed with the Guangzhou Municipal Construction Committee, whether the project leader is consistent with the registration, and whether to register online as a construction engineer. If the original verification is not available on the spot or the bidder has not filed with the Guangzhou Municipal Construction Committee, or the project leader is inconsistent with the bid application, or does not register online as a construction engineer, he will not participate in the bid opening.

(3) Bid Opening: The tenderee will open the bid in public according to the law for the bidders who have fulfilled the bid registration procedures and meet the requirements of point (2) above. At the time of bid opening, only the bidding quotation in the bidding documents will be opened, and the quotation will not be sorted.

(4) Determine the lowering rate: Before the bid evaluation, the representative of the tenderer, the representative of the bidder, and the representative of the bidding agency will pass the 0-5 number ball under the supervision of the Guangzhou Construction Engineering Trading Center and the supervision of the bidding management department. Randomly shake out the three number balls (swing out and put them into the ball), take the average of the three number balls as the number of floating points X (the two decimal places are reserved for the calculation, and the last position is calculated by rounding off, for example 0.00%).

(5) Bid evaluation and calibration: For the bidding quotation of all bidders who participate in the bid opening (that is, not higher than the highest bidding value of the bid, not less than 70% of the bidding maximum value), the bidding quotation is determined according to the following rules. Average: The bidders averaged 5-10 people, removed 1 highest value and 1 lowest value; after 11-30 people, removed 2 highest values ​​and 2 lowest values ​​and averaged them; For 50 people, the average value is removed after removing the 5 highest values ​​and 5 lowest values; after 51 to 100 people, the 10 highest values ​​and 10 lowest values ​​are removed and averaged; in the case of 100 or more, the 20 highest values ​​are removed. After averaging with the 20 lowest values, the average bid price obtained is multiplied by (100% - the number of floating points X%) to obtain the evaluation reference value. Calculate the corresponding deviation value (ie, the bid price minus the absolute value of the evaluation reference value) by comparing the valid bid price proposed by all bidders with the bid evaluation reference value. According to the deviation value from low to high (the bidders have the same deviation value, the bidders with low quotation are ranked first; if the quotation is the same, the voting order is randomly determined by the bead method), select the top 9 The qualification documents and bid documents of the bidders are sent to the expert review. When the current 9 bidders have passed the qualification review and the validity of the bidding documents are less than 3, the bidding documents and the qualification examination documents ranked in the 10-20th bidding price will be sent to the bid evaluation committee for review. The bid evaluation committee will recommend the top three bidders as the first to third winning candidates in the order of the bidding and the bidding reference value deviation from the lowest to the highest in the order of the bid evaluation and the bid evaluation.

6. The bidder's bid price, bidding average value, bid evaluation reference value, and deviation value are all accurate to “minutes”. If the bidder's bid price appears as a decimal point below "minute", the value below "minute" will not be calculated. If the average value of the bid price, the reference value of the bid evaluation, and the deviation value appear as the decimal point below the “minute”, it shall be calculated by rounding off.

7. The result of the winning bid will be publicized on the website of the Guangzhou Construction Engineering Trading Center and publicly accepted by the bidder.

8. When the tenderer issues the "Successful bid notice" to the winning bidder, the project leader of the winning bidder must carry the relevant documents in accordance with the time and place designated by the tenderee. If the person in charge of the project is not present, it is deemed to be automatically waived the bidding qualification.

11. The bidder may report to the following units any illegal and unfair content in this announcement and the bidding documents: (1) Guangzhou Panyu District Construction Project Tender Management Office, complaint telephone; (2) Guangzhou Panyu District Construction Bureau, (3) Guangzhou Panyu District Supervision Bureau, complaint telephone. The complaint is subject to the official written complaint document, signed and stamped with the official seal of the legal person.

12. This announcement is posted on the website of Guangzhou Construction Engineering Trading Center (website: http://) and the website of Guangzhou Panyu District Construction Bureau (website: http://js.panyu.gov.cn) If the media is released, the revisions and supplements to this announcement and announcements are different in the texts published by the media, and the texts published on the website of the Construction Engineering Trading Center of Guangzhou shall prevail.

13. The bid applicant shall download the tender notice, bidding documents and drawings and other materials through the website of Guangzhou Construction Engineering Trading Center or the website of Guangzhou Panyu District Construction Bureau, and complete the bidding related work according to the requirements of this tender announcement and bidding documents. Company Name: Guangzhou Jianhai Engineering Consulting Co., Ltd. Contact: Agricultural Worker Tel: 020-85675978 E-mail: Fax: Postal Code: Address:


USB Ports 4 Gang Extension Cord supplying power support for multiple electrical devices from a single 4 Way Electric Outlet but also maintain a compact and simple design. The Outlet and Plug can be various type e.g. American, Australian, British, French, German, Universal......

- Compact and Light weight: 4 Outlet Power Board with 6 feet cord power strip is sufficient and easy for most of power needs occasion. Flexible design provides you multiple choices e.g. surge protection, overload protection, USB quick charging etc. 

- advanced flame retardant material is safe and reliable as well as pure copper high conductive elements compliance with international standards like ETL, CE, etc.

4 Gang Power Strip

4 Gang Power Strip, 4 Outlet Power Board, 4 Way Electric Outlet, USB Ports 4 Gang Extension Cord, Surge Protected 4-Outlet Power bar

ZhongShan JITONGLONG Plastic Hardware Co. Ltd. , http://www.toukoo-electronics.com

Posted on