The high electricity bills are spent by the township finances. It is indeed difficult. How can we reduce the millions of electricity bills? In the past few days, Shaoxing road lighting has attracted public attention. Can it be replaced with energy-saving devices, such as solar street lights or other energy-saving lamps? On November 28th, some companies took the initiative to call the reporters and expressed their willingness to provide lamps for free.
Brother suggested that one side of the street light can be illuminated
In my experience, in fact, if the street lights on the national road can be fully lit, this brightness is enough. Taxi driver Feng Feng called the evening hotline yesterday and made his own suggestion. Master Feng said that if the maintenance cost needs 3 million yuan, then only the street lamp that is repaired on one side will cost as much as 1.5 million yuan, and the electricity fee can be reduced by half accordingly. Isn't this a burden that can be alleviated? Like Master Feng. There are also many people who have made similar suggestions. Some people said that if all the lighting costs are too high and they are unable to support them, then whether they can be lit at intervals, in addition to several major intersections, add a few more street lights between some intersections with far distances.
Is it feasible to switch to energy-saving lamps or solar energy?
It is understood that the streetlights of Shaoxing Municipal Facilities Co., Ltd. governs a total of 27,000 street lamps in the main roads and street communities in the urban area. If all the energy is selected, it is undoubtedly a huge electricity bill. Therefore, last year, the streetlights implemented energy-saving renovations on eight roads in the urban area, and installed street lamp energy-saving devices. For example, all the incandescent lamps were replaced with high-pressure sodium lamps on the main roads in the urban area, and the energy-saving lamps were replaced on the small roads. Conversion to adjust the time of lighting, such as the appropriate delay in the long nights of the night, and after 11 o'clock in the evening, the flow of people is rare, then turn off the street lights on the side of some sections.
Some members of the public suggested that the ordinary light bulbs could be converted into energy-saving lamps or switched to solar street lamps. The reporter also interviewed relevant departments.
A staff member of the marketing department of Zhejiang Sunshine Group told the reporter that there are several problems to be considered when converting ordinary light bulbs into energy-saving lamps. For example, the two bypass light covers are generally fixed, so the energy-saving lamps of the same power do not conform to the design of the original lampshade. Requirements? If the lamp is not enough to replace the high-power energy-saving lamp, then it can not be placed in the lampshade? These need to know the design of the street lamp of the East Lake to the road section of the 104 National Road in advance. If it does not meet the original design requirements, it needs to be re-required. Design replacement lamp covers, etc.
Some people have also suggested that the road section can be replaced with solar street lights. The relevant departments think that it is temporarily not feasible. Although solar street lights can be energy-saving and environmentally friendly, they are not easy to control. Once the daytime illumination is insufficient, the brightness of the light will be weak when the light energy is released. Moreover, the cost of installing solar street lights is too high.
Some companies are willing to provide energy-saving lamps for free.
On the afternoon of November 28th, Zhao, the manager of a Zhejiang office in Shenzhen, found that the evening newspaper said that the company is willing to invest in the street lights of the 104 National Road East Lake to the road section for free to replace the power-saving LED light source. According to the staff member, LED is a new kind of light source, which can be used for general lighting, and its appearance is similar to that of ordinary light bulbs. This is very convenient to install, just need to install LED light source appliances. A 60 watt LED bulb is equivalent to a 250 watt regular bulb. LED bulbs consume only one-tenth the power of ordinary bulbs. Manager Zhao said.
30 years of reform and opening up, lighting changes (Photos) Lighting industry production and sales report [First half] [July] [August] [September] [October]
1
RFID Card Inlay,RFID Inlay for Smart Card,RFID Dry Inlay
Smart Cards,RFID Cards And Tag Co., Ltd. , http://www.cnsmartcards.com