If there is insufficient volume in the professional audio system, it is more difficult to solve this problem completely. Because many problems are often checked for a long time and can not be checked for reasons, can not solve the root cause of the problem. However, there are still many problems that will automatically disappear when the problem is not detected, and will come out after a while.
In the professional audio system, as long as there is no error in the design, the problem can be found from the construction link, which greatly saves time and points out the direction for checking the problem.
(1) The professional audio equipment housing is charged: This situation is generally caused by the fact that all equipment in the sound engineering must use electricity, so it is easy to encounter some of the equipment housing charging problems when debugging, the housing is not directly charged. Affect the use of the device, but for the sake of safety, this matter must be completely resolved.
(2) The volume appears in the professional audio system: It may also be due to problems in the installation and process of the device. The most common reaction to this problem is that the volume of the sound encountered during the commissioning of the project is always small, and has been up to The phenomenon of designing the sound pressure level is not required.
(3) Resonance and feedback of sound field in sound engineering: In many projects, careful consideration has been made in design and construction, but because the details are not considered or cannot be encountered, it will affect the normal use of people. This situation should be eliminated.
(4) Interference noise generated by sound engineering: If the time of encountering interference noise in professional audio engineering is relatively long, it is more complicated to solve this situation. Because the causes are different, step by step from the construction of the system. Find the cause, the problem can always be solved.
(5) Light out of control in sound engineering: In the professional sound engineering, if the lighting movement is uncoordinated due to human action, it will not be controlled by the controller, and it is prone to accidental malfunction. Although some slight out of control will not have a big impact, if the problem cannot be solved in time, it may cause the fault to expand further. Moreover, the malfunction of the lighting is not tolerated in the performance of the performance.
(6) Damage to the lamp of the computer lamp: If the lamp is damaged in the professional audio project, it is a normal phenomenon. If the usage time is too short, you need to check the reason.
(7) Video image is not normal: In professional audio engineering, the video transmission distance is generally long, and the signal needs to be processed and distributed continuously before being distributed to multiple display devices. There are usually many links, so it is easy to cause the video image quality to be bad due to different reasons, which directly affects the viewing effect. This situation should be handled.
(8) The sound of the wireless microphone is unstable: many professional audio projects are equipped with wireless microphones, but if the installation process is improperly installed and debugged, it is prone to poor use, especially in major performances. On-site, the state of wireless microphone use will directly affect the quality of the performance, and this issue must be taken seriously.
The above is a summary of the problem of insufficient volume in professional audio engineering. If you encounter the above problems, don't be sloppy, you should analyze the cause in time to avoid big problems.
Decorative Wall Lights,Decorative Lights,Wall Art Decor,Light Decoration
Guangzhou Huanyu Clocking Technologies Co., Ltd. , https://www.findclock.com