According to the statistics of the Ningbo Electric Safety Testing Center laboratory, in the first half of this year, a total of 52 LED lamp cup products were tested for safety, and the failure rate of insulation performance testing was as high as 40%. According to the analysis, the problem of non-conformity is mainly manifested in the following two aspects: 1. The breakdown or flashover occurs when the appliance is subjected to the withstand voltage test; 2. The creepage distance and clearance between the L and N poles of the lamp body are not reached. standard requirement.
From the perspective of unqualified reasons, it can be roughly classified into the following three categories: First, the industry threshold is low, the quality of production enterprises is uneven, and some family-run enterprises do not understand the international standards of products, and even do not know the existence of standards. Second, fierce market competition has caused some enterprises to give up the bottom line control of quality. In order to reduce costs, they intentionally cut corners and shoddy goods, resulting in the insulation performance of products not meeting the requirements of importing countries. Third, the quality management system of some enterprises is not perfect, and the mobility of first-line assembly employees is large, which leads to the stability and consistency of product quality cannot be effectively guaranteed.
To this end, the inspection and quarantine department reminds relevant enterprises: First of all, it is necessary to firmly establish the concept of "product quality is the first lifeline", and earnestly stress the integrity and quality in the production process. The second is to understand and thoroughly understand the relevant standard requirements, as a yardstick for product development and design work. At the same time, in the production process, it is necessary to make full use of the corresponding testing equipment, strengthen the self-inspection of the quality control points, and avoid the unqualified problems of products going abroad.
Fahold, a 8 year old company brings light power to your life by illuminating your offices, factories, warehouses, shopping malls, airports, etc. with its high quality LED Linear lighting products and solutions. LED Linear lighting springs out few years ago, we see the power of the linear lighting solutions, so over the years, we have been innovating our Utra Slim Driver for these type products to give you healthy low carbon environment with low energy consumption. Application: LED Light boxes, led linear lights, led troffer ect.
LED Linear lights driver Specifically for linear lights,indoor driver for non-waterproof,Constant Current with aluminum/iron casing, with the dimming function of 0-10V/PWM/RX/dali. Flicker free and SELV Safety output design, UL/FCC/TUV/RCM/CB/CE Certified. Europe and North America market.
Parameter:
Input Voltage:100-277V/100-240V
Output voltage: 25-40V/ 12V / 24V
Current: 100-1800mA / 2500mA / 5000mA
Power factor: >0.95
THD: <15%
Dimming: 0-10V/PWM/RX/Dali
FAQ:
Question 1:Are you a factory or a trading company?
Answer: We are a factory.
Question 2: Payment term?
Answer: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment
can be negotiated.
Question 3: What's the main business of Fahold?
Answer: Fahold focused on LED controllers and dimmers from 2010. We have 28 engineers who dedicated themselves to researching and developing LED controlling and dimming system.
Question 4: What Fahold will do if we have problems after receiving your products?
Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we will do our best to solve any of your problems with our good after-sale service.
LED Linear Lights Driver
Linear Lighting Driver,Utra Slim Driver,Ul Dimmable Driver,Led Light Box
ShenZhen Fahold Electronic Limited , https://www.fahold.com