Furi Electronics revised non-public offering plan

Furi Electronics issued a revised version of the non-public offering plan. On August 16, 2013, the company's board of directors reviewed and approved the relevant proposals for the non-public offering of shares. According to the report issued by the relevant intermediary agency, the Board of Directors made a supplementary revision to the “Fujian Furi Electronics Co., Ltd. Non-public Issuance of Stock Plan” disclosed on July 15, 2013, and compiled the updated “Fujian Furi Electronics Co., Ltd.”. Non-public offering of shares.

The number of non-public offerings does not exceed 50 million shares (including 50 million shares). The board of directors of the company shall, according to the authorization of the general meeting of shareholders, determine the final number of issuances in consultation with the sponsor institution (lead underwriter) of the issuance according to the market situation at the time of issue. If the company's A-shares issue ex-dividends such as cash dividends, stock dividends, transfer of share capital, new shares or allotment during the issue date from the issue date to the issue date, the issue range will be adjusted accordingly.

The non-public offering will adjust the amount of shares issued so that the net amount of funds raised after deducting the issuance expenses does not exceed the amount of funds required for the proposed investment project (ie 278 million yuan) for the following projects:

Furi Electronics said that in order to ensure the smooth progress of the fund-raising investment projects and protect the interests of all shareholders of the company, the company will invest in the project with self-raised funds before the funds are raised, and then replace the funds after they are in place; The use of raised funds is lower than the total investment of the project, and the company will solve it through bank loans or other means.

We are Manufacturer and Supplier to offer Modular Plugs in standard configurations to terminate modular cords for patching or work area applications. Our Modular plugs can be terminated to the exact cable length needed in order to maintain a neater, more organized installation. The modular plugs terminate twisted-pair cable with 26 - 22 AWG (0.40mm - 0.64mm) solid or 7-strand conductors with an insulated conductor diameter of 0.86 - 0.99mm (0.034 - 0.039 in.). All modular plug contacts have 50 microinches minimum of gold plating over nickel and meet TIA-968-A and IEC 60603-7 specifications.

Modular Plug is the name given to a family of electrical connectors originally used in telephone wiring and now used for many other purposes. Many applications that originally used a bulkier, more expensive connector have now migrated to modular connectors. Probably the most well known applications of modular connectors are for telephone jacks and for Ethernet jacks, both of which are nearly always Modular Connectors.

Modular Connectors were originally used with the registered jack system, which precisely describes how the connectors are wired for telecommunications. The registered jack specifications define the wiring patterns of the jacks, not the physical dimensions or geometry of the connectors of either gender. Instead, these latter aspects are covered by ISO standard 8877, first used in ISDN systems. TIA/EIA-568 is a standard for data circuits wired on Modular Plug&Connectors.

Other systems exist for assigning signals to modular connectors; physical interchangeability of plugs and jacks does not ensure interoperation, nor protection from electrical damage to circuits. For example, modular cables and connectors have been used to supply low-voltage AC or DC power and no clear standard exists for this application.

Modular Plugs

RJ45 Modular Plugs, RJ11 Modular Plugs, AMP Modular Plugs, Modular Connector, Cat6 Modular Plugs, Cat5e Modular Plugs

NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com