Discussion on the management method of LED display IP address

First, the traditional system IP address management mode
At present, LED display screens are mainly used in two situations, one is one-to-one, one computer corresponds to one LED display or multiple computers in the local area network, corresponding to one display; the other is one computer Multiple LED displays or multiple computers correspond to multiple LED displays. In the case of forgotten IP addresses, many manufacturers' solutions are to let the user reset the factory settings, let the control system restore to the factory default IP address, or only one device at a time, this is only the first case. Well, there is only a single display, but when it comes to the second case, multiple display screens, the workload is very large, so the feasibility of these methods is very low, even restore the factory settings, you need to touch the hardware processing, if the screen The installation is high, the reset brings great difficulty to the user, and even if the recovery, including the control system setting information, remark information and other related content are cleared one by one, for users who are not very familiar will cause more and more Trouble, leading to a more chaotic situation. The following figure shows the structure of the management system of the LED display IP address.
As shown in Figure 1, the system includes a host computer 1 and more than one LED display control system 2, each LED display control system 2 is provided with an asynchronous control card 3, the upper computer 1 and each LED display control The asynchronous control card 3 in the system 2 is connected.
The asynchronous control card 3 is provided with a storage module 31. The storage module 31 stores an IP address, a subnet mask, a default gateway, a port number, a physical address, a master control information, and a master control address of the LED display control system 2. .
figure 1

Electric Tea Kettle:

 

Quickly brew the perfect cup of tea or make pour over coffee right at the table with the Electric Tea Kettle. With 1500 watts, this Electric Kettle boils water faster than a microwave, and is safer to use than a stovetop kettle because it automatically turns off when the water reaches a boil. Serving at the table is no problem as the kettle lifts off the base without the cord. Additional features include two water level windows and a pull-lid to make filling and serving easy. 

 

Features:

  •  Thermostat Control – Having a thermostat control allows the kettle to [know" when to shut off. This will prevent damage to the heating element and is an important feature in all modern styles.
  •   Auto shut off/Boil Dry Protection/Fuse â€“ these are three features that are great for protecting the safety of users as well as extending the life of the electric kettle.  The fuse and boil dry protection shut the kettle off if the water gets down below a certain level or if it`s left on for an extended period of time, It doesn`t burn up the kettle.
  • Colors and Designs â€“ Electric kettles come in all shapes, sizes and colors. Finding one that will fit with the kitchen design is actually pretty easy.  Finding one that matches and that has the features you`re looking for can be a bit harder, but with all the choices available and the newer models on the market today, you will be able to find the perfect electric kettle for your kitchen.
  • Savety in Electric- the heating element is typically fully enclosed, with a power rating of 2–3 kW at 220V. In countries with 110V mains electricity, kettles may be less powerful (1–1.5 kW) to avoid drawing too much current and requiring a very thick supply wire.

Application:

Heat the tea thoroughly

Bottle the water/beer

Boil water

Electric Tea Kettle

Electric Tea Kettle,Stainless Steel Electric Tea Kettle,Cordless Electric Tea Kettle,Electric Cordless Glass Tea Kettle

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectric.com

Posted on