According to reports, MLSLED bulbs (warm white), Shangjin LED bulbs (energy-saving 6W), Sori 2U electronic energy-saving lamp chrysanthemum series (super bright) and other brand-name products and Ouyida Technology, Resno Products produced by famous manufacturers such as Lighting and Jindian Lighting Appliance Factory are on the list.
It is said that energy-saving lamps are not energy-saving.
It is understood that the country has encouraged the use of energy-saving and environmentally friendly products in recent years, and has introduced relevant subsidy policies. Energy-saving lamps have become more and more popular among consumers due to their energy-saving and environmental protection. However, due to the low entry barriers for energy-saving lamps, The process is relatively simple, the quality of the products is mixed, and many consumers cannot identify their advantages and disadvantages.
The Guangzhou Municipal Administration of Industry and Commerce found that unqualified energy-saving lamps mainly had problems such as product marking, protection against electric shock, mechanical strength, lamp power, and energy efficiency rating. This not only has the potential to affect human health, but may even lead to the risk of electric shock, posing a threat to consumers' lives. The reporter found that the unqualified rate of energy-saving lamps is as high as 68.75%. Among them, the energy efficiency labels of 11 products do not meet the requirements of CEL-005 implementation rules. That is to say, the energy-saving lamps in these markets are called energy-saving, but they are not in conformity with them. Experts remind that when purchasing products, you should pay attention to the preservation of invoices, shopping receipts and other related documents. When a consumer dispute occurs or a counterfeit or shoddy commodity is purchased, it may be promptly reported to the relevant functional department or complained to the Consumer Council.
The relevant person in charge of the Guangzhou Municipal Administration for Industry and Commerce explained that the main problems in the failure of the energy efficiency label are summarized as follows: First, the product nameplate specification model is inconsistent with the energy efficiency label, and second, the product nominal power is inconsistent with the energy efficiency label, and the third is that the energy efficiency label size is not up to standard. The standard requirements, the fourth is that the measured initial light efficiency does not meet the energy efficiency rating requirements, and the fifth is that the measured initial light efficiency does not meet the initial light efficiency requirements. The reason is mainly that some small enterprises have low level of technology research and development, and product performance indicators cannot meet the standard requirements. At the same time, the enterprise did not know enough about the energy efficiency label, and even did not pay attention to it, resulting in the energy efficiency label not meeting the requirements.
There are 2 products that are marked with no current information and do not meet the standard requirements. The main reason may be that the manufacturer does not understand the standard thoroughly, and the incomplete information is easy to cause safety hazards in installation and use, and it is easy to mislead consumers.
In this sampling, the mechanical strength items of 2 products did not meet the standard requirements. During the torque test of these two unqualified products, the lamp cap is separated from the lamp body, causing the consumer to lose the product according to the correct installation method, which may cause the electric shock to be damaged and endanger the safety of the consumer. .
LED bulbs below 30 yuan product quality is difficult to guarantee
Guangzhou Industrial and Commercial Co., Ltd. collected a total of 30 samples produced by 18 production enterprises for LED bulbs. After inspection, 15 samples were found to be unqualified, and 15 samples were judged as supervised overall failure. The failure rate was 50. %.
According to reports, there are 12 items of marking items that do not meet the standard requirements. Because the manufacturer did not understand the standard, 5 of them did not identify the rated voltage of the lamp on the commodity according to the standard requirements, 10 did not identify the rated frequency of the lamp on the commodity according to the standard requirements, and 6 did not meet the standard requirements. Specify, on the package, or on the instruction manual, the specific conditions and restrictions that the lamp should follow when it is used, such as whether the lamp is suitable for use in a symbol in a dimmable line. Incomplete sign information is likely to cause safety hazards in installation and use, and it is easy to mislead consumers.
There are 7 products that do not meet the requirements for insulation resistance and dielectric strength after moisture treatment. These 7 products were placed in a dielectric humidity test of 4000V (7 products are all HV type, 220V-250V) after being placed in a humidity chamber of 95% relative humidity of 30% for 48 hours, and may be used in a dielectric strength test of 1 minute. Poor quality insulation materials or insufficient clearance and creepage distances lead to breakdown, posing a safety threat to the user's life and property.
According to industry insiders, the domestic LED lighting market is disorderly, and the products below 30 yuan are basically unreliable, which is also an important reason hindering the popularity of LED lamps. At present, LED market enterprises are scattered and there are thousands of brands, but there are not many brands that are truly trustworthy. Industry experts said: "The quality of products below 30 yuan is difficult to guarantee."
Shenzhen GEME electronics Co,.Ltd , https://www.gemesz.com