Microchip Technology Inc., the world's leading provider of integrated patented microcontrollers, analog devices and flash memory solutions, announces the introduction of a new family of 8-bit microcontrollers (MCUs) with next-generation analog and digital peripherals. Ideal for general purpose applications, as well as battery charging, LED lighting, ballast control, power conversion and system control applications.
The PIC12F(HV)752 MCU integrates a complementary output generator (COG) peripheral that provides non-overlapping complementary waveforms for inputs such as comparators and pulse-width modulation (PWM) peripherals, while implementing dead-band control, auto-shutdown, Automatic reset, phase control and blanking control. In addition, the new MCU features 1.75 KB of self-reading program memory, 64 bytes of RAM, an on-chip 10-bit ADC, capture/compare/PWM modules, high-performance comparators (with response times below 40 ns), and two 50 mA drive capabilities. I/O helps engineers improve overall system functionality and reduce costs.
Engineers are always faced with the challenge of reducing system cost while improving system performance and efficiency, especially for recent LED lighting and battery charging applications. The PIC12F(HV)752 MCU meets these needs with a rich set of on-chip general purpose and dedicated peripherals such as an integrated COG, high performance comparator, and 50 mA output that directly drives the MOSFET.
The PIC12HV752 MCU is a high voltage device in the family that integrates a shunt regulator that allows the device to operate from 2V to a user-defined maximum voltage with an operating current of less than 2 mA. This high voltage device is ideal for cost sensitive applications with high voltage supply rails. In addition, 4-channel 10-bit ADCs are available for a variety of sensor and mTouchTM touch sensing applications, including capacitive touch.
The PIC12F(HV)752 MCU integrates a complementary output generator (COG) peripheral that provides non-overlapping complementary waveforms for inputs such as comparators and pulse-width modulation (PWM) peripherals, while implementing dead-band control, auto-shutdown, Automatic reset, phase control and blanking control. In addition, the new MCU features 1.75 KB of self-reading program memory, 64 bytes of RAM, an on-chip 10-bit ADC, capture/compare/PWM modules, high-performance comparators (with response times below 40 ns), and two 50 mA drive capabilities. I/O helps engineers improve overall system functionality and reduce costs.
Engineers are always faced with the challenge of reducing system cost while improving system performance and efficiency, especially for recent LED lighting and battery charging applications. The PIC12F(HV)752 MCU meets these needs with a rich set of on-chip general purpose and dedicated peripherals such as an integrated COG, high performance comparator, and 50 mA output that directly drives the MOSFET.
The PIC12HV752 MCU is a high voltage device in the family that integrates a shunt regulator that allows the device to operate from 2V to a user-defined maximum voltage with an operating current of less than 2 mA. This high voltage device is ideal for cost sensitive applications with high voltage supply rails. In addition, 4-channel 10-bit ADCs are available for a variety of sensor and mTouchTM touch sensing applications, including capacitive touch.
Geared Stepper Motor,Planet Gearbox,Spur Gearbox,Nema23 Geared Electric Motor
Changzhou Sherry International Trading Co., Ltd. , https://www.sherry-motor.com