10nm process Snapdragon 835 will come Samsung S8 This is to start?

Tencent Digital (Wang Yang) November 17 news, Qualcomm today announced that it will cooperate with Samsung Electronics to jointly develop the next generation Xiaolong 835 processor, the biggest feature is to use Samsung's 10-nanometer process technology to create, while supporting Quick Charge 4.0 fast charging technology .

Qualcomm said that due to the adoption of the new 10nm process technology, the Snapdragon 835 processor will have lower power consumption and higher performance, thereby enhancing the user experience of mobile devices.

It is reported that in October of this year, Samsung first announced the mass production of the 10-nanometer process. Compared with the previous-generation 14-nanometer process, 10 nanometers can reduce the chip size by 30%, while improving the performance of 27% and reducing the power consumption by 40%.

With 10nm process technology, Qualcomm Snapdragon 835 processor has a smaller SoC size, allowing OEMs to further optimize the internal structure of the mobile device's fuselage, such as adding batteries or achieving a thinner design. In addition, the improvement of process technology will also improve battery life.

Currently, Xiaolong 835 has been put into production. It is expected that the equipment equipped with Xiaolong 835 processor will be shipped in the first half of 2017.

In addition to the Snapdragon 835 processor, Qualcomm also officially announced the new Quick Charge 4.0 fast charging technology to support the Snapdragon 835 processor. QC 4.0 will continue to increase charging efficiency on the basis of previous generations of programs. The official said that charging for 5 minutes can extend the use of the phone for 5 hours, and the charging efficiency is increased by 30% compared to the previous period. In addition, QC 4.0 also integrates USB-C support for a wider range of adaptations.

White IDC Connector

White IDC Connector :IDC connector automotive connector is a kind of component that electronic engineering and technical personnel often contact. Its function is very simple: in the circuit is blocked or isolated between the circuit, set up a bridge of communication, so that the current flow, so that the circuit to achieve the intended function. The form and structure of automobile connector are changeable. It is mainly composed of four basic structural components: contact, shell (depending on the variety) and insulator.


White IDC Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com

Posted on