Â
Features & Specifications of K-1937BT bus Bluetooth speaker
1.Can play your TF card card, U disk, MP3 format audio files.Do not need to switch, remember to read automatically.Enjoy mobile music and powerful multimedia music speaker, perfect listening to your mobile phone's music player, support MP3, MP4, notebook computer, PC, FM.
2. No consumption of mobile phone battery, rechargeable lithium batteries bring their own portable music device, is a professional mobile phone.Built-in rechargeable lithium battery can work 3 to 5 hours, charging time from 2 to 3 hours.
Technology Parameters
For / charging voltage: DC 5V
The audio output interface: 3.5mm standard interface
Body material: ABS
Accessories: USB charging cable, audio cable, battery 3.5mm standard interface
FM frequency range: 87.5-108MHz
Expanding ring frequency: 150~18KHz (3dB)
Speaker: 3W*1
Battery: 5C batteries
Jack description function
ANT: uses the FM insert audio line DC-5V: power charging interface
LINE IN: audio input
POWER: power switch
Interface: SD or U disk interface.
Package of K-1937BT Car Bluetooth speaker
1 * Mini Speaker
1 * USB Charging Cable
1 * Retail box
HDMI, known as High Definition Multimedia Interface, is mainly used for transmitting HD audio and video signals.
There are three types of data transmitted by HDMI TMDS (plus Hsync and Vsync count as four) :
1.Preamble (control information) is mainly used to control the Data to be transmitted next, namely Data Island or Video Data
2.Data Island, all kinds of packet information, including audio packet, image packet, etc
3.Video Data, Video pixel Data. HDMI can transmit pixel Data in RGB and YUV formats
4. And Hsync and Vsync
HDMI Source device (HDMI HPD) will monitor the Hotplug port of the sink device. If the Hotplug is High, it will prove that the device can work, and then read DCC; if it is low, it will prove that the device is disconnected.
The HDMI Sink device should notify the source device that EDID has been changed by pulling the Hotplug down, and the source device will read the new EDID again after the Hotplug is pulled up, which should be more than 100ms.
HDMI provides that the EDID can be read by DCC when the 5V pin of HDMI is powered on, that is, the Hotplug needs to be high, and some Hotplug is directly connected to the 5V
TMDS Clock is the Pixel Clock, the Clock frequency used for a Pixel point. Through TMDS Clock CLK pins transmitted to the receiver, but the receiver is not clear for what TMDS Clock frequency of the sender sent, so you need to through the Phy (Phy is analog to digital conversion section, is different from the ADC, Phy is don't know the sampling frequency, the need to lock frequency and phase lock, detect the exact input frequency) to lock.
Pc Hdmi Input,Hdmi Input Adapter,Hdmi Input Splitter,Hdmi Port On Tv
TONYA DISPLAY LIMITED , https://www.tydisplay.com