Cool open smart routers with multiple control methods

Experience router storm spikes and saw everyone's enthusiasm for the router. Last time I tried a simple operation of the mobile phone routing, we must all understand some of the. Today, let's take a look at what other ways to implement routing.

First, connect your router to the power supply and connect it to the Internet. Connect the mobile device to the open WIFI router. Then simply configure it.

Configuration method:

Use PC or mobile phone browser to enter the web address: mycoocaa.com or 192.168.1.1 Go to the setup guide interface of Cool Open Routing. Complete the routing setup as shown in the figure below.
Enter the initial password admin login

Set Wi-Fi password

After the setup is complete, we can login and control in any of the following ways.

-------------------------------------------------- -----------------------------------------------
A. The PC web page opens mycoocaa.com or 192.168.1.1 in the browser, enters the router administrator password, and successfully logs in the routing background.
The first thing that catches the eye is the current routing status, which visually shows the usage of all connected devices and external storage devices. Here we can kick off unknown connection devices and we can resume use.

Network settings:
1. The WiFi name and password of the router's 2.4 network and 5G network can be re-edited

2. Configure the networking type selection, that is, the way the user accesses the Internet. Generally, the home uses DHCP and PPPoE. In PPPoE dial-up networking, you need to enter a user name and password to connect to it. DHCP accesses the Internet and you can use the port. Static IP needs to specify an IP address, which we rarely use.

3, advanced settings under the column contains more features.
Set the signal strength yourself: power saving, wall-through and standard mode, wireless channel settings. At the same time, wireless WiFi can be hidden or turned on.

Modify the MAC address of the router's WAN port: When a router is already in use in your home, the server of the carrier (such as telecommunications) may be bound to the MAC address of the original router; It may not be necessary; at this time, it is necessary to clone the original router MAC address to the router. (However, like this situation is almost rare)

Intelligent QoS setting function: more reasonable bandwidth allocation under the condition of insufficient bandwidth, similar to the function of VIP channel.
For example, your home network bandwidth is set to 10M, a, b, c three devices, a is set to 80%, b, c is not set.
(1) If a, b, and c all download bandwidth in a frenzy, a can use 8M bandwidth, and b and c can only split the remaining 2M bandwidth.
(2) If a is just a chat, the actual use of bandwidth is 0.1M; then both b and c can split the remaining 9.9M bandwidth.
(3) If b and c are just chatting and the actual bandwidth is 0.2M, then a can use the remaining 9.8M bandwidth.

3, routing setting system status: This shows the system information, LAN status, wireless status, Internet status and other information, at a glance.

System Upgrade: This will check if your system is the latest version. You can choose the firmware file to manually upgrade.

Network Detection: Check if the network you are using is crowded. You will be recommended to use other channels, and you can switch between them with one click and use them more smoothly.

Change the administrator password: When other users also know the administrator password, he can also enter the background to set, such as kicking people, limiting the network and other operations, this time you can modify the administrator password, so that other users can only use the network and Can not control the network.

Restore the initial factory setting function, this function can also open the key recovery initial factory setting by pressing and pressing for 8 seconds.

Second, the mobile phone web page landing background (this function is consistent with the computer web page landing method)

Strip light with both RGB colorful light and warm light, the length of the strip light is 2 meters, 60pcs LED lamp beads inside are high-quality and energy-saving , the light source is stable without strobe.

The installation is very simple, just need to peel off the 3M glue on the back, you can paste and decorate any place.

With the exclusive designed 2.4G remote controller, get you off the switch and turn on / off the lights anywhere, one remote controller can set 4 groups, each group is recommended to match up 8pcs bulbs, one remote controller can max control 32 bulbs. This remote controller is suitable for all 2.4G version of RGBW products under [linkuphome".

remote

The remote control uses colorful touch buttons, the color touch buttons are comfortable and sensitive. The remote controller has the functions of grouping, lighting, brightness adjustment, color light automatic cycle mode, three cycle speeds can be choosed. The wireless control distance is around 20 meters. Low power consumption makes the remote controller only need 4pcs AA batteries, but can be used for two years.

Product Parameters

Description: Smart RGB Strip Light with 2.4G Remote Control
Control Qty: 1-48 pcs
Control distance: 20m
Material: Polyurethane with 3M back adhesive
Working Voltage: 100-240V
Frequency: 50/60Hz
Lamp Color: RGB+Warm White
Color Temperature: 3000K
Meters: 2 Meters
LED Power: 7W
Power Adapter: 12V/2A
Product Specification: 30pcs LED beads/M, 2 M/root, total 60pcs LED beads.
(3pcs strip lights can be connected, max to 6 meters.Need customized. Pls inform in advance if needed)
Warranty: 2 Years
Color box size: 20*18*4.8cm
G.W. of Unit: 0.29kg
N.W. of Unit: 0.21kg

Discreption: 2.4GRF Wireless RGB Remote Controller
Product dimension: 105mm *33mm,
Product Net Weight: 150g
Material: ABS & Metal
Battery: 4*AA battery (not included)
Working Power: 6V
Standby Power: 3 mW
Frequency Band: 2400-2483.5MHz/2.4GHz
Control Distance: 20m
Control bulb qty: 1-32 pcs
Packing: Each in a color box
Warranty: 1 Year
Color box size: 16.7*14.7*4.5cm
G.W. of Unit: 0.22kg
N.W. of Unit: 0.15kg

Strip Light With Remote Control

Strip Light With Remote Control,Remote Control LED Lights Battery Powered,Remote Control Strip Light,Remote Control Flashing Strip Light

Ningbo Homey Photoelectric Technology. Co., Ltd , https://www.linkuphome.com